SWAG V3.0 Portaband Table, Fits, Milwaukee, Dewalt, Makita, Harborfreight…….

  • 03

$84.45 (-40%)

1907

  • Restocking Fee: 20%
  • Manufacturer Part Number: SWAG V3.0 Portaband Table
  • Returns Accepted: Returns Accepted
  • Condition: New
  • Item must be returned within: 14 Days
  • Refund will be given as: Money Back
  • Modified Item: No
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: United States
  • Custom Bundle: No
  • Brand: SWAG Off Road
  • Non-Domestic Product: No

    • SWAG V3.0 Portaband Table
    Here at SWAG our Portaband
    tables are built for individuals looking for quality, 100% American made tools
    at an affordable price. Designed for those working with limited space and or those
    looking to maximize the full potential of their hand held band saws.
    Product evolution and expansion
    has
    led us to SWAG Portaband table V3.0 which features built in dual miter
    gauge slides, bolt on 1/8″ thick steel legs to greatly reduce shipping
    cost, a removable
    steel center section and an improved blade slot with narrower window to
    reduce potential
    blade binding
    .
    To convert your saw into a vertical band saw installation
    could not be any easier, remove the factory foot guards two or three screws
    depending upon model and reinstall the removable center section with the
    provided fasteners. With the SWAG V3.0 there is a thumb knob
    included in the kit. Insert the saw into the stand and install the thumb knob
    into the threaded hole in the removable center section. You now have a
    saw that performs two functions, a portable band saw and a vertical band saw
    that does not require any tools to switch between the two functions
    Our
    V3.0 table is cut on a CNC laser out of 3/16″ thick steel plate, formed on a CNC press brake
    and weighs in at ~ 18 pounds
    for ultimate durability.
    The Table dimensions are 9.75 tall, 11″ deep & 13.5″ wide. With
    the saw installed the overall dimensions are ~22″ tall, 18″ deep &
    13.5″ wide.
    This kit contains all the necessary hardware to attach your
    Portaband saw listed below, to the SWAG 3.0 Portaband table.
    Please verify that your model of saw is listed below as a supported model of the SWAG V3.0 table.
    °
    Milwaukee
    Deep cut model #’s 6230, 6230N, 6232, 6232-6, 6232-5, 6232-51, 6232-55,
    6232-6, 6232-6N, 6232-8N, 6236, 6238, 6238-8, 6238N, 0729-20, 0729-21,
    M28, V28
    °
    Dewalt
    Deep cut model #’s DWM120 DWM120K, D28770, D28770K, DCS374, DCS374B, DCS374P2, DCS376P2
    °
    Harbor Freight Bauer
    Deep cut Item #’s 63763, 63444, 64194, 62800, 1678E-B
    °
    King Canada “Industrial”
    # KC-8377
    °
    Makita
    Deep cut model #’s 2107F, 2107FK, 2107FZ, XPB02Z, XBP02TX, BPB180Z-18VOLT
    °
    Bosch
    # GCB10-5, The foot switch will not work with the electronic trigger switch on this saw
    °
    Home Depot WEN Brand
    # 94396
    °
    Northern Tool / Iron Ton
    # 73134
    °
    Grizzly Tools
    Deep cut model # G8692
    °
    If you own the
    Dewalt
    DW328 saws please refer to
    our V2.0 Portaband tables.
    °
    If you own the
    Porter Cable
    # 7721, 7723 & 7724 saws please
    refer to our V2.0 Portaband tables.
    °
    If you own the new
    Milwaukee
    # 6232-20, 6232-21, 6238-20 & 6238-21 saws please refer to
    our V4.0 Portaband tables.
    This
    item ships out using USPS priority mail or UPS, please provide a valid
    shipping address that works for both shipping carriers.
    Optional Accessories
    120V 15 Amp Power Maintained Foot Switch
    Imagine how easy your job is going to be using the foot pedal to start and stop your SWAG Portaband table.
    Plug
    your Portaband power chord into the 15 amp outlet on the foot pedal.
    Plug the foot pedal cord into a 110 volt outlet. Press the pedal to
    start the saw, then press again to
    turn off.
    INCRA V27 Miter Gauge Assembly
    We
    save you the hassle and run around of trying to find a miter gauge
    assembly that is compatible with your SWAG Portaband table. The INCRA
    V27 miter gauge is design & manufactured in the USA, and build to
    last as long as our tables. The V27 features four adjustable expansion
    joints to eliminate any side play and provides super smooth drag free
    motion along the miter track. The V27 also features their Angle lock indexing for quick tool free angle adjustment.
    Click Here for a YouTube Demo Video and Instruction
    Additional details can be found on
    our website: swagoffroad.com

    Main Menu